Air Or Hydraulic Tools - Powerful Riveting - Rocky Mountain Rivet

This durable air/hydraulic riveter (302-E), with its fully adjustable vacuum system that holds the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system automatically collects the spent mandrel into a bottle, creating a cleaner, safer work environment by preventing spent mandrels from falling to the floor. A traction pulling power of 2,000 lbs. allows this tool to easily install 3/32" to 3/16" diameter rivets in all alloys, and 1/4" diameter open-end rivets in aluminum/steel combination. A swivel air inlet along with a push button trigger and molded frame provides the operator with maximum comfort using minimal effort. The recommended airline pressure is 85-95 PSI.

This is our most powerful air/hydraulic riveter (304-E), with its fully vacuum system that holds the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system automatically collects the spent mandrel into a bottle, creating a cleaner, safer work environment by preventing spent mandrels from falling to the floor. A traction pulling power of 4200 lbs. allows this tool to easily set structural rivets such as KlikLock® and other structural blind rivets. Its long 7/8" stroke enables the tool to set most rivets in one pull. In addition to the nosepieces for structural rivets, nosepieces to install 3/16" and 1/4" standard rivets are also included along with a push button trigger and molded frame which provides the operator with maximum comfort using minimal effort. The recommended airline pressure is 85-95 PSI.

This newly designed light-duty air/hydraulic riveter (MP-3V) is ergonomically designed with the professional in mind. The light weight 2.9 lbs. well balanced MP-3V includes a Vacuum System and is designed to maximize a 3/4” stroke and 1,800 lbs. of pulling force along with a 3 jaw setup that gets the job done. The air supply can be connected directly or you can use the supplied air connection with the attached hose for operator convenience. Each tool is supplied with nosepieces to set 3/32”- 3/16” rivets in all alloys, adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and a removable swivel air connection line with an air off/on valve built in. The adjustable Vacuum System control located inside the mandrel collection bottle allows you to control the force of the air needed to hold the rivet in place or you may operate with the vacuum system turned off. Recommended air pressure is 60-95 PSI.

This newly designed heavy-duty air/hydraulic riveter (MP-4V) is ergonomically designed with the professional in mind. The light weight 3.7 lbs. well balanced MP-4V includes a Vacuum system and is designed to maximize a 1” stroke and 3,420 lbs. of pulling force with a 3 jaw setup that gets the job done. The air supply can be connected directly or you can use the supplied swivel air connector with the attached hose for operator convenience. Each tool is supplied with nosepieces to set 5/32”- 1/4” rivets in all alloys. A 1/4" monobolt nosepiece is included in addition to adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and an air off/on valve. The adjustable Vacuum System control knob located on the side of the tool allows you to control the force of the air needed to hold the rivet in place or you may operate with the vacuum system turned off. Recommended air pressure is 70-95 PSI.